P10 Indicator:
◆ Modularization design Exi, Exd explosion protection housing
◆ 2-wire electrical signal output (4-20)mA/HART
◆ Optional limit alarm
Technical Data
Type |
F56 |
|||
Medium |
Liquids, gases, vapors |
|||
Rang(conversion to 100% value of reference fluid ) |
Water : 20℃ |
(10-300000)L/h , Special order on request: |
||
Air : 0.1013MPa, 20℃ |
(0.7-3000)Nm3/h, Special order on request: |
|||
The turn-down ratio |
10 : 1 |
|||
Accuracy class |
Mechanical indicator |
1.0, 1.5, 2.0, 2.5 |
||
Mechanical indicator with LCD(battery powered, service life: 2 years) |
1.0, 1.5, 2.0, 2.5 |
|||
Mechanical indicator with two-wire signal output (4-20)mA/hart communication protocol |
1.0, 1.5, 2.0, 2.5 |
|||
Medium temperature |
Machinery indicator with LCD(battery powered, service life: 2 years) |
-80℃~+300℃ (PTFE:0~80℃) High temperature 400℃ |
||
Mechanical indicator(battery powered, service life : 2 years) |
-40℃~+120℃ (PTFE:0~80℃) High temperature 400℃ |
|||
Mechanical indicator with two-wire signal output (4-20)mA/hart communication protocol |
-40℃~+120℃ (PTFE:0~80℃) High temperature 400℃ |
|||
Ambient temperature |
Mechanical indicator |
-40℃~+120℃ |
||
Mechanical indicator with LCD(battery powered, service life: 2 years) |
-20℃~+60℃ |
|||
Mechanical indicator with two-wire signal output (4-20)mA/hart communication |
-20℃~+60℃ |
|||
Viscosity of fluid |
DN15: F15.00~F15.03 η<5 mPa.s, F15.04~15.30 η<30 mPa.s; DN25: η<250 mPa.s; DN50~250: η<300 mPa.s |
|||
Nominal pressure |
DN15~DN50 |
4.0MPa(Max DN15: 42MPa, DN25: 42MPa, DN50: 32MPa) |
||
DN80~DN250 |
1.6MPa(Max DN80: 10MPa, DN100: 6.4MPa, DN125: 4.0MPa, DN150: 4.0MPa, DN200: 2.5MPa, DN250: 2.5Mpa) |
|||
Process connection |
Flange connection, Standard: DIN2501, ANSI, JIS(select Chinese standard freely, priority select DIN) |
|||
Hygiene clamp, screw joint are selected in the order |
||||
Electrical connection |
M20×1.5 1/2"G 1/2"NPT 3/4"G 3/4"NPT |
|||
Installation |
Vertical installataion(bottom in up out and up in bottom out, Horizontal installataion(left in right out and right in left out) bottom in side out, side in side out |
|||
Straight unimpeded inlet run |
≥ 5D |
|||
Straight unimpeded outlet run |
≥ 250 mm |
|||
Degree of protection |
||||
Ex marking |
EEx ia II CT5 |
|||
EEx d II CT6 |
||||
Ex electrical data |
Ui = 28V Ii = 93mA Pi = 0.65W Ci ≤ 5nF Li =0mH |
|||
Safety barrier data |
Uo ≤ 28V Io ≤ 93mA Po ≤ 0.65W Co ≥ Ci+Cc Lo ≥ Li+Lc |
|||
Carried Standard |
JB/T 6844-93 |